User Guide for Skinlinks Pro
How to Use Skinlinks Pro?
(click here for user guide EstellaMAX and EstellaFACE)
FIRST STEPS WITH SKINLINKS PRO (Aesthetic Shop staff)
Step 1: Connect the Handpieces
Insert each handpiece into the correct connectors, following the user instructions. If the handpieces are connected incorrectly, an error message will appear when the device is powered on, prompting you to switch their positions.
Step 2: Connect the Power Supply
Plug in the power cord and press the on/off switch located at the back of the device.
Step 3: Turn on the Device
Press the power button located at the bottom of the Skinlinks device screen.
Step 4: Verify the Device Connection
Once the device turns on, the device logo will appear if everything is connected correctly. If not, consult the user manual to troubleshoot the error and try again. If all is well, please select the menu you wish to use (Slimfit, Body, Face, or Mum).
Step 5: Select the Desired Program
Choose the program you wish to use. While not mandatory, we recommend starting with the lymphatic drainage program for the most optimal results, given the specialization of our device.
Step 6: Select the Intensity Level
Choose the intensity level for the program. While our device does not cause side effects, we recommend starting with the lowest setting if you have sensitive skin and gradually increasing the intensity as needed.
.
Step 7: Prepare and Start the Program
Select the appropriate handpiece for the area to be treated (face or body). Apply gel to the handpiece or the area of skin where the program will be performed. Position the handpiece at a 90º angle to the skin. Press the Start button to begin the program.
BEFORE USE (customer)
Important Notice: Before using the Skinlinks Pro or any of our products, we strongly recommend consulting with your specialist if you have any questions or uncertainties about the programs. For technical inquiries regarding the operation or use of the handpieces or devices, and if the user manual does not provide sufficient information, please reach out to us for further assistance.
AFTER USE:
Step 1: Turn Off the Device
Once the program finishes, indicated by a sound, turn off the device by pressing and holding the on/off button until the screen goes dark.
Step 2: Clean and Store the Device
Wipe the device with a damp cloth and cover it with the protective cap.
Usage Time: 90–120 minutes
Daily Use Possible (Recommended every 2–3 days)
Maintenance recommendations;
- Follow the User Manual: Always start by thoroughly reading the user manual provided with the device. This will ensure you understand all functions and safety precautions.
- Cleanse Your Skin First: Before using the device, cleanse your face to remove any impurities or makeup. This allows for better absorption and effectiveness of the treatment.
- Use Recommended Gels: Apply only the recommended ultrasound or water-based gels. These gels are specifically designed to enhance the device’s performance and prevent damage to your skin.
- Adjust Intensity Appropriately: Start with the lowest intensity setting, especially if you have sensitive skin, and gradually increase as needed. This helps your skin acclimate to the treatment.
- Maintain Proper Device Angle: Ensure the device is held at a 90º angle to your skin for optimal contact and effectiveness. Avoid pressing too hard.
- Limit Treatment Duration: Follow the recommended treatment duration for each program. Overuse may not increase benefits and could lead to skin irritation.
- Avoid Sensitive Areas: Be cautious around delicate areas, such as under the eyes, and avoid using the device on broken or irritated skin.
- Clean the Device After Use: Wipe the device with a clean, moist cloth after each use to remove any gel or residue. This helps maintain hygiene and prolongs the life of the device.
- Store Properly: Keep the device in a cool, dry place when not in use. Always cover it with the protective cap to prevent dust and damage.
- Consult Professionals: If you have specific skin conditions or concerns, consult with a skincare professional before using the device to ensure it is appropriate for your needs.
- Avoid Direct Contact with Water: Do not immerse the device in water or use it in wet conditions. Clean only with a damp cloth.
Additional Usage Tips for Your Devices:
- Consistent Use: For the best results, use the device consistently as part of your skincare routine. Regular use helps maintain and enhance the benefits over time
- .Avoid Excessive Pressure: Apply the device gently to avoid any discomfort or damage to your skin. Let the device do the work without pressing too hard.
- Keep the Device Dry: Ensure that the device is always dry before storing it. Avoid using it in excessively humid conditions.
- Use as Directed: Follow the recommended program settings and guidelines for each treatment. Adhering to these instructions ensures optimal performance and safety.
- Clean After Each Use: Always clean the device after each use to remove any residue or gel. This helps maintain hygiene and prolongs the lifespan of the device.
- Avoid Contact with Water: Do not submerge the device in water or use it in the shower. The device should only be cleaned with a damp cloth.
- Store Properly: Keep the device in a cool, dry place when not in use. Use the protective cap to safeguard it from dust and damage.
- Consult a Professional: If you have any skin conditions or concerns, consult with a healthcare professional before using the device to ensure it is suitable for your skin type.
- Charge Safely: Follow the manufacturer’s guidelines for charging the device. Use only the recommended charger and avoid overcharging.